Test Report

(This report is issued subject to the terms and conditions set out below) Setsco Services Pte Ltd.

Date : [Bookmark1]	Our Ref: [#InspectionNo#]	18 Teban Gardens Crescent Singapore 608925 Tel : (65)6566 7777 Fax: (65)6566 7718 www.Setsco.com Business Reg. No. 196900269D

MAGNETIC PARTICLE TESTING

PROJECT : CONTRACT C917A- DTL STAGE 2
CLIENT:[#EntityName#] [#Address#], [#DoorNo#], [#Pincode#], [#Location#]	CUSTOMER REF TEST LOCATION DATE OF TEST TESTING OFFICER	:- [#ConsumerNumber#] :-[bookmark] :- [#InspectionDate#] :- [#TechnicoName#]
ATTENTION: [bookmark] (Tel or Hp: [bookmark])
EXAM METHOD :[bookmark] MATERIAL :[bookmark] THICKNESS :[#Thickness#] WELDING PROCESS :[#WeldingProcess#] SURFACE CONDITION :[#SurfaceCondition#] SURFACE TEMP(°C) :[#SurfaceTemp#] LIGHT INTENSITY :[#LightIntensity#] LIFTING POWER :[bookmark]	TEST MATERIALS: CONTRACT MEDIUM PARTICLES [bookmark] Batch No:[#ContrastBatchNo#] [bookmark] Batch No:[#ParticleBatchNo#] EQUIPMENT :[bookmark] CURRENT TYPE :[bookmark] MAKE MODEL SERIAL :[#MakeModel#] SERIAL NO :[#SerialNo#]
TEST PROCEDURE: As in BS EN ISO17638:2009 Non-destructive testing of welds Magnetic Particle Testing (NDT/TP/MT/30rev.1). [#ProdSpacing#]
TECHNIQUE: [#Technique#]
TEST RESULTS: [#TestResult#]

* Acceptance criteria in accordance with BS EN ISO 23278: 2009 Table 1 (Level 1) 2009
Legend : S – Satisfactory U – Unsatisfactory NSD – No Significant Discontinuities

[bookmark]	[bookmark]
Supervisor	Assistant Manager (NDT Inspection) Mechanical Technology Division

Terms & Conditions:

1. The Report is prepared for the sole use of the client & it is prepared based upon the Items submitted, the services required by the client & the conditions under which the services are performed by SETSCO. The Report is not intended to be representative of similar or equivalent services on similar or equivalent items. The Report does not constitute an endorsement by SETSCO of the item.

2. SETSCO agrees to use reasonable diligence in the performance of the services but no warranties are given & none may be implied directly or indirectly relating to the Services, the report or the facilities of SETSCO.

3. The Report may not be used in any publicity material without the written consent of SETSCO

4. The Report may not be reproduced in part or in full unless approval in writing has been given by SETSCO

5. SETSCO shall under no circumstances be liable to the client or its agents, servants or Representatives, in contract, tort, (including Negligence or breach of statutory duty) or otherwise for any direct or indirect loss or damage suffered by the client, its agents, servants or Representatives howsoever arising or whether connected with the Services provided by the SETSCO herein.